ID: 23981
Description
Wundatherm Premium+ is suitable for tiling direct ? no backerboards or intermediate layers required*, Using Ultra method simply prime the aluminium first, for tile adhesives.
No need to dig up floors, just spray and lay!.
Tile direct to board! ? Suitable for fitting Tile, Stone*, Laminate & wood direct to boards.
Choose Premium+ for the best heat spread on the market!
Wundatherm is suitable for ALL property types including renovations & refurbishments.
Dimensions: 1200mm x 600mm
20mm boards require 16mm pipe in 100m lengths using 150mm pipe spacings Approved for Tiling directly onto - without the need for a backerboard*, just prime the aluminium for tile adhesives.
Wundatherm Premium+ Board is made with 400 kPa polystyrene, the strongest available on the market. Wundatherm underfloor heating boards are lightweight, super strong, easy to fit and designed to be fitted over any existing or new floor. No specialist tools are required, they can be simply cut to shape using a fine toothed saw or craft knife. MAPEI, INSTARMAC and NORCROS approved for tiling onto - Using Mapei & Instarmac approved S2 flexible adhesive and primers please Refer to factsheet FO1b. *Natural stone may require a backerboard - please call for details or refer to Factsheet FO1b for specific details. MAPEI & ULTRA approved for tiling Suitable for Laminate, Wood, Carpet Vinyl and even Tiles. Quick to install using Wunda Spray contact adhesive ready for use straight away. 400 kPa - Fully approved by Mapei & Instarmac for tiling onto Using Mapei & Instarmac approved S2 flexible adhesive and primers please Refer to factsheet FO1b.
400 kPa - the strongest EPS board available (Uses 4 times the material of Wundatherm Low Density for superior strength)
20mm board uses 150mm pipe spacings with 100m pipe length
Mapei & Instarmac approved for tiling directly onto using specified methods as per Wunda factsheet FO1b
Easy to cut to shape with basic tools
Eliminates the moisture, weight, mess and lengthy drying times of a screed Underfloor system
Laminate and engineered wood can be laid directly on top. Tiles can be fixed to the boards using Mapei or Ultra approved adhesive (available from Wunda) when using Ultra method just prime the aluminium first. If you wish to carpet or lay vinyl a suitable backer board will need to be laid on the Overfloor boards. The recommended maximum linear loop length for a 20mm board is 100m.
Beware when comparing Overfloor boards - although they may all look similar make sure you check the tech spec to ensure it\'s the correct strength for your desired finish.
Rapid Response? and maximum heat is only possible with Wundatherm Hard board, because it uses 200 micron aluminium
Aluminium thickness Board heat up speed Heat output Under Wood, Laminate or Engineered Heat output Under Carpet
Thick Rapid Response? 100w/m? 80w/m?
Thin Very Fast 60w/m? 55w/m?
Budget Fast 40w/m? 35w/m?
No Aluminium (Basic) Slow 20w/m? 17w/m?
Input temperature used in the above table is 40?c A micron is simply a measurement of thickness where 1000 microns is equal to 1mm. 200 Microns gives the best performance with Rapid Response? in all property types. Suitable for all Refurbishments and Renovations.
Please note: Output and system performance is dependent on insulation standards and environmental conditions.
21 panels in total, brand new and still boxed.
?150 for the lot that?s only around ?7 per panel, cheaper versions on line are selling for ?12 minimum so these are a bargain!
No need to dig up floors, just spray and lay!.
Tile direct to board! ? Suitable for fitting Tile, Stone*, Laminate & wood direct to boards.
Choose Premium+ for the best heat spread on the market!
Wundatherm is suitable for ALL property types including renovations & refurbishments.
Dimensions: 1200mm x 600mm
20mm boards require 16mm pipe in 100m lengths using 150mm pipe spacings Approved for Tiling directly onto - without the need for a backerboard*, just prime the aluminium for tile adhesives.
Wundatherm Premium+ Board is made with 400 kPa polystyrene, the strongest available on the market. Wundatherm underfloor heating boards are lightweight, super strong, easy to fit and designed to be fitted over any existing or new floor. No specialist tools are required, they can be simply cut to shape using a fine toothed saw or craft knife. MAPEI, INSTARMAC and NORCROS approved for tiling onto - Using Mapei & Instarmac approved S2 flexible adhesive and primers please Refer to factsheet FO1b. *Natural stone may require a backerboard - please call for details or refer to Factsheet FO1b for specific details. MAPEI & ULTRA approved for tiling Suitable for Laminate, Wood, Carpet Vinyl and even Tiles. Quick to install using Wunda Spray contact adhesive ready for use straight away. 400 kPa - Fully approved by Mapei & Instarmac for tiling onto Using Mapei & Instarmac approved S2 flexible adhesive and primers please Refer to factsheet FO1b.
400 kPa - the strongest EPS board available (Uses 4 times the material of Wundatherm Low Density for superior strength)
20mm board uses 150mm pipe spacings with 100m pipe length
Mapei & Instarmac approved for tiling directly onto using specified methods as per Wunda factsheet FO1b
Easy to cut to shape with basic tools
Eliminates the moisture, weight, mess and lengthy drying times of a screed Underfloor system
Laminate and engineered wood can be laid directly on top. Tiles can be fixed to the boards using Mapei or Ultra approved adhesive (available from Wunda) when using Ultra method just prime the aluminium first. If you wish to carpet or lay vinyl a suitable backer board will need to be laid on the Overfloor boards. The recommended maximum linear loop length for a 20mm board is 100m.
Beware when comparing Overfloor boards - although they may all look similar make sure you check the tech spec to ensure it\'s the correct strength for your desired finish.
Rapid Response? and maximum heat is only possible with Wundatherm Hard board, because it uses 200 micron aluminium
Aluminium thickness Board heat up speed Heat output Under Wood, Laminate or Engineered Heat output Under Carpet
Thick Rapid Response? 100w/m? 80w/m?
Thin Very Fast 60w/m? 55w/m?
Budget Fast 40w/m? 35w/m?
No Aluminium (Basic) Slow 20w/m? 17w/m?
Input temperature used in the above table is 40?c A micron is simply a measurement of thickness where 1000 microns is equal to 1mm. 200 Microns gives the best performance with Rapid Response? in all property types. Suitable for all Refurbishments and Renovations.
Please note: Output and system performance is dependent on insulation standards and environmental conditions.
21 panels in total, brand new and still boxed.
?150 for the lot that?s only around ?7 per panel, cheaper versions on line are selling for ?12 minimum so these are a bargain!